- V1 vs V2
- Related Products
100% Free of PFOS, PFOA, lead, dioxins, heavy metals & BPA; Free from phthalates: contains no DEHP, DBP, BBP, DINP, DIDP and DnOP. Read Blog Article
Soft & stretchy waterproof fabric created by laminating 1 mil PUL to ProECO® Stretch-FIT Organic Cotton Sheer Jersey LITE.
Made with Lycra, giving it a four-way stretch and recovery, for a tight hold and fit.
Features SILVADUR™ Antimicrobial to inhibit the growth of bacteria, fungi and algae on the fabric, control bad odors and provide intelligent freshness protection.
SILVADUR® is proven to be safe against the skin. Tests of bamboo, cotton and polyester treated with 10 times the recommended amount of SILVADUR® found no skin irritation or sensitization after multiple exposures.
Extremely breathable, soft, stretchy & durable
CPSIA certified, meeting stringent standards by the U.S. Consumer Products Safety Commission on lead and phthalates and flammability.
Very durable, tested to withstand 300+ washings.
Super soft, breathable and flexible.
Unique process permanently melt-bonds our specially-treated TPU film to the fabric without toxic solvents. The process emits no toxic waste or VOCs that are harmful to the environment.
The fabric is manufactured with no harmful chemicals or finishes in controlled conditions in American textile mills.
Engineered to meet exacting USA requirements, this is the highest quality-assured organic fabric on the market.
The main difference between the V1 & V2 versions is the base fabric that is used to create the waterproof fabric.
V1 PUL Organic Cotton Jersey LITE Silver fabric is made by laminating our ProECO Organic Cotton Jersey Stretch-FIT LITE Silver.
V2 PUL Organic Cotton Jersey LITE Silver fabric is made using our ProECO Organic Cotton Sheer Jersey LITE Silver.
Country of Origin: Made in USA
🇺🇸 Learn Why Oeko Tex Certification is NOT Relevant to American Made Fabrics
Manufacturer: AKAS Tex
Fabric Content: A proprietary blend of organic cotton, lycra spandex & polyurethane engineered for high performance
📚 Read about Fiber Content for Fabrics - Labeling Made Easy
Fabric Weight: 175 GSM / 5.2 ounces per square yard
Fabric Width: 55" wide / 139 cm wide
Approx. Stretch (Length): 10%
Approx. Stretch (Width): 30%
Quantity Information: Quantity = number of continuous yards., Orders of more than 10 yards may ship in more than 1 piece. If you would like a continuous piece, please leave a comment & we will try to accommodate your request., Seconds quality material may not ship in completed lengths. They may be in several cut pieces not less than 18" or so.
Care Instructions: No prewash, Wash hot, Wash with like colors, Dry medium, No Fabric softener, Only non-chlorine bleach if needed, Warm iron if needed on fabric side
❗ Read about the 7 Reasons Your Fabric Could Break Down - Fabric Care Made Easy
💧 Apply Seam Sealing Tape (for light to medium weight PUL, ProCare or other polyurethane or vinyl coated fabrics) or Seam Sealing Tape Heavy Duty (for medium to heavy weight PUL (2-5 mil), ProCare HD or medium to heavy weight polyurethane or vinyl coated fabrics) over sewn seams of fabric to make them windproof/waterproof - NOT recommended to replace stitching.
Important Note about strong odors from PUL fabrics:
These fabrics are made on industrial machines; there are no chemicals used on them during manufacturing, but the lamination process in which the PU film is adhered to the base fabrics at a very high temperature produces an odor. The smell usually dissipates as it sits in our warehouse for a while, but our PULs sell out very fast, so there is rarely a chance for the manufacturing smell to air out. The odor diminishes over time, but washing and drying the fabrics will expedite the process. Run them through a quick wash & dry cycle to get rid of any odors.
Additional Care Instructions:
Preparing your fabric: This fabric is delivered cut & sew ready, pre-washing is neither recommended nor required. If you must pre-wash your yardage, use a gentle cycle and hang dry to avoid wringing damage.
Fabric sticking: This is a common problem with plasticized fabrics like PUL. It's best to use a Teflon foot, these are available at sewing stores for between $3 and $10 for most machines. If you can't get a teflon foot, you can try sewing through wax paper or daubing a tiny amount of sewing machine oil on your presser foot.
Leaking after sewing: Make sure you use good quality polyester thread. Tex-27 or 65/2 grades are the best. Cotton or rayon threads should not be used in diapers as they naturally wick moisture. Also make sure you use BALL POINT NEEDLES! Remember, PUL is a knit, so like all knits use a ballpoint needle. Sharps (the kind you use for wovens and felts) will slice the yarns which will cause the holes around the threads to enlarge and leak.
Need PUL for binding: You can make your own binding from PUL knits (instead of using FOE). Cut strips across the grain if you desire some stretch, and with the grain if you want to limit stretch. PUL is a knit base so you DO NOT cut it on the bias.
Washing Instructions: It is recommended to use a zero residue detergent - liquid detergent preferably. Wash temperatures can be hot, between 145 and 165 degree F (65 to 75 degree C).
DO NOT use bleach. If required non chlorine oxygenated bleach can be used sparingly, provided the detergent should not already contain sodium percarbonate (the active ingredient in many oxygenated bleaches). The detergent must also not contain any Fabric softeners, Natural oils, Perfumes, Dyes, UV brighteners, Stain guard ingredients, Enzymes.
DO NOT add washing soda, soda ash or soda crystals to the detergent. The use of vinegar and/or baking soda can together or individually cause delamination.
Rinsing Instructions: It is highly recommended to add an extra rinse cycle since even minute traces of detergent or other washing chemicals which may not have been washed out from the diaper/product made from the PUL are highly detrimental to the film and reduce the life of the laminate.
Drying Instructions: Dry on medium heat, at a temperature not more than 130 degree F (50 degree C). Use of drying sheet with fabric softeners is not recommended. DO NOT wring or iron on the film side. Any urethane film is affected by bleach, chlorine and dry heat exceeding 130 degree F.
Exposure to sunlight affects the urethane film. The film will turn yellow and crack over time. When the UV index is high this can happen in as little as 10 hours.
*Wazoodle Fabrics makes no representations, collateral agreements, conditions or other warranties of any nature or kind, express or implied, with respect to such information or product and assumes no responsibility as to the accuracy or the suitability of the information or product for purchaser’s intended uses. The purchaser should conduct its own tests to determine the suitability of the material for their particular application.
Related Product Styles
No Returns Policy
All our orders are custom and cut to size. Due to the nature of our process, we are unable to accept any returns or exchanges.
- All natural fiber fabrics may have small holes, runs, etc. in the fabric. These are out of our control, however we take precaution & send you extra yardage in lieu of the defect.
- All bolts & rolls may have a +/- 10% variation. Discounted pricing reflects any discrepancies.
- Bolts & Rolls Seam & Damage Allowance - May contain seams where two ends of the fabric are sewn or taped together or marks which can be easily washed away. We always give extra yardage for seam & damage allowances.
- Hook & Loop are custom cut to your specifications. No returns accepted.
- Elastics are custom cut to your specifications. No returns accepted.
- Snaps & some elastics are packaged by weight so count is approximate. Pricing reflects possible minor quantity discrepancies.
This information is obtained by industry accepted test methods and represents typical data. Nothing contained herein is to be construed as permission or recommendation to infringe any patent. It is furnished for your general information only and does not represent a warranty or guarantee of Wazoodle Fabrics.
Wazoodle Fabrics makes no representations, collateral agreements, conditions or other warranties of any nature or kind, express or implied, with respect to such information or product and assumes no responsibility as to the accuracy or the suitability of the information or product for purchaser’s intended uses. The purchaser should conduct its own tests to determine the suitability of the material for their particular application.
The foregoing statements shall supersede the terms and conditions, whether express or implied, of any separate agreement of purchase and sale between Wazoodle and the purchaser.
Copyrights & Trademarks
AKASTiq® is a registered trademark of AKAS Tex.
Dri-QWick™ is a registered trademark of AKAS Tex.
ECO-PUL™ is a registered trademark of AKAS Tex.
ProCare® is a registered trademark of AKAS Tex.
ProCool® is a registered trademark of AKAS Tex.
ProECO® is a registered trademark of AKAS Tex.
ProSoft® is a registered trademark of AKAS Tex.
Stretch-FIT™ is a registered trademark of AKAS Tex.
TransWICK™ is a registered trademark of AKAS Tex.
SILVADUR™ is a registered trademark of DuPont de Nemours, Inc.
REPREVE® is a registered trademark of Unifi, Inc.
COOLMAX® is a registered trademark of The LYCRA Company.
Lycra is a registered trademark of The LYCRA Company.
Zorb® is a registered trademark of Wazoodle Fabrics.
Can I use your brand information on my products?
Yes, it is possible, however please see the Licensing FAQ for all the requirements.
We're here to help you Find the Right Fabric for Your Project
Why Wazoodle Fabrics?
1+ Million Yards of American-Made Fabrics In Stock
Huge Selection of High-Quality Eco-Friendly Fabrics
Our goal is to help you efficiently find fabrics that fulfill your unique wants and needs. Our Fabric Finder can save you some time while you shop if you have a specific type of fabric or end product in mind. However, If you would like to get a curated recommendation for your specific application, contact us and we'd love to help!