
What's New at Wazoodle
What's New
Our fabrics don’t contain PFOS, PFOA, lead, dioxins, heavy metals, BPA, or phthalates. They aren’t made with super absorbent polymers, so their quality and super absorbency don’t fade with time. Read Blog Article
Super soft and super absorbent, this ultra heavyweight, single-sided microfiber terry has small absorbent loops on one side and a flat back.
When cutting, use a sharp knife or scissors as the fabric can easily fray. If you prefer to pre-wash, serge all sides to prevent unraveling of threads. Pre-washing is optional; it won’t hurt the fabric, but it isn’t necessary.
CPSIA certified, meeting stringent standards by the U.S. Consumer Products Safety Commission on lead and phthalates and flammability.
All Zorb fabrics are designed with the ability to exponentially increase their absorbency; using multiple layers of Zorb for your product will significantly increase its already impressive absorption capacity.
Our Zorb Microfiber Loop Terry Fabric is so absorbent that it can soak up eight times its weight in less than two seconds. It works 20 times faster than materials like bamboo, cotton, and hemp knits. The fibers are constructed to distribute moisture and hold that moisture within the fabric.
This fabric does not require pre-washing, so you can start on your project quickly. When creating your product, it’s good to cut the fabric with a sharp knife or a pair of scissors since the material can easily fray.
Our Zorb Microfiber Loop Terry Fabric is a heavyweight, single-sided microfiber terry type material.
The fabric is ideal for activewear, bathrobes, bibs, cage liners, cloth diapers, dog diapers, menstrual pads, mop pads, nursing pads, period panties, pet potty pads, towels, unpaper towels, washcloths, and yoga towels.
If you need soft fabric that will get the job done, this is what you need!
It is not recommended to pre-wash before sewing. If you prefer to pre-wash, serge (or sew/finish) all open edges to prevent unraveling of threads. However it is recommended to wash before using it.
Liquid detergent is preferred over powder because there is a chance that the powder will not dissolve completely and in that case the powder will be stored inside the microfiber. This risk is compounded if cold water is used. Remember, microfibers tend to hold everything, so use half the quantity of detergent you would normally use.
Never wash with fabric softeners. The microfiber will accumulate the softeners and over a period of time, will be saturated with it, reducing its efficiency.
Never wash the microfiber with other terry or other fabric which has lint. The microfiber will treat lint or any other fibers and dirt particles and store the particles inside the microfiber reducing its efficiency.
Do not wash with anything sharp or with anything that has hook tape. Sharp objects can snag the loops and cause them to run. Hook tape will attach to the loops and tear the fabric.
Never dry the microfiber in a dryer on high heat. It could actually melt the fibers with excessive heat and lock the traps. Dry on low heat and permanent press is the best setting.
All our orders are custom and cut to size. Due to the nature of our process, we are unable to accept any returns or exchanges.
This information is obtained by industry accepted test methods and represents typical data. Nothing contained herein is to be construed as permission or recommendation to infringe any patent. It is furnished for your general information only and does not represent a warranty or guarantee of Wazoodle Fabrics.
Wazoodle Fabrics makes no representations, collateral agreements, conditions or other warranties of any nature or kind, express or implied, with respect to such information or product and assumes no responsibility as to the accuracy or the suitability of the information or product for purchaser’s intended uses. The purchaser should conduct its own tests to determine the suitability of the material for their particular application.
The foregoing statements shall supersede the terms and conditions, whether express or implied, of any separate agreement of purchase and sale between Wazoodle and the purchaser.
AKASTiq® is a registered trademark of AKAS Tex.
Dri-QWick™ is a registered trademark of AKAS Tex.
ECO-PUL™ is a registered trademark of AKAS Tex.
ProCare® is a registered trademark of AKAS Tex.
ProCool® is a registered trademark of AKAS Tex.
ProECO® is a registered trademark of AKAS Tex.
ProSoft® is a registered trademark of AKAS Tex.
Stretch-FIT™ is a registered trademark of AKAS Tex.
TransWICK™ is a registered trademark of AKAS Tex.
SILVADUR™ is a registered trademark of DuPont de Nemours, Inc.
REPREVE® is a registered trademark of Unifi, Inc.
COOLMAX® is a registered trademark of The LYCRA Company.
Lycra is a registered trademark of The LYCRA Company.
Zorb® is a registered trademark of Wazoodle Fabrics.
Yes, it is possible, however please see the Licensing FAQ for all the requirements.
We source fibers and yarns within the United States mostly direct from local mills.
No PFAS, PFOA, lead, dioxins, heavy metals, BPA, phthalates, formaldehyde, nanoparticles or super absorbent polymers (SAP).
We establish partnerships with vendors keeping an eye on the sustainability of their processes.
Engineered with a unique knitting construction without using SAP, so your end product stays absorbent for its’ lifetime
Made in US mills with safe workplace practices and fair wages following all labor regulations.
Closely controlled facilities and EPA-compliant processes that do not add waste or pollute the environment.
Are you overwhelmed with the choices available? Or not sure which product will work for your application?
Drop us a detailed message and we'll help identify the Right Fabric for YOU!