
What's New at Wazoodle
What's New
Used for sealing sewn seams on light to medium weight PUL, ProCare or other polyurethane or vinyl coated fabrics - NOT recommended to replace stitching & NOT designed for 3-layer PUL or CORE PUL
The adhesive side is smooth, the outer, barrier side is slightly rough. You can feel the difference. On the roll, the adhesive is on the inner side of the tape.
Applied over sewn seams of fabrics to make them windproof/waterproof.
Washability of sealed seams is excellent.
CPSIA certified, meeting stringent standards by the U.S. Consumer Products Safety Commission on lead and phthalates and flammability.
Recommended to be applied using professional grade sewing machines with an attachment for seam sealing, or other commercial hot air taping, laser, RF welding or ultrasonic machines at a moderate temperature and high line speeds
For small applications it is possible to apply using a home iron. Place the smooth adhesive side of the tape over the seam to overlap the seam and the fabric edge. Place some silicone paper (any substrate, such as PTFE paper, to protect the tape from sticking to the iron) paper over the tape and press using a hot iron. Steam irons do not work on this, as the holes may prevent application of proper pressure and heat. just a plain hot iron
Sealing temperatures must be between 98°C/194°F and 160°C/320°F. Temperatures lower or higher may not provide a waterproof seal. Different fabrics may require a different setting.
Used for polyurethane and vinyl substrates. May not work on other fabrics.
*Recommended parameters for using with a Hot air sealer are: Temperature: 350°C to 700°C, Time: 4.0 to 7.0 m/min, Pressure: 3.92 bar
*Bonding conditions will vary for different machines, fabrics and applications. Optimal bonding conditions must be established by the user for each application prior to production.
*NOTES: Physical and performance characteristics shown are as provided by the vendor and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user has to determine whether the product is fit for a particular purpose and application.
The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.
All our orders are custom and cut to size. Due to the nature of our process, we are unable to accept any returns or exchanges.
This information is obtained by industry accepted test methods and represents typical data. Nothing contained herein is to be construed as permission or recommendation to infringe any patent. It is furnished for your general information only and does not represent a warranty or guarantee of Wazoodle Fabrics.
Wazoodle Fabrics makes no representations, collateral agreements, conditions or other warranties of any nature or kind, express or implied, with respect to such information or product and assumes no responsibility as to the accuracy or the suitability of the information or product for purchaser’s intended uses. The purchaser should conduct its own tests to determine the suitability of the material for their particular application.
The foregoing statements shall supersede the terms and conditions, whether express or implied, of any separate agreement of purchase and sale between Wazoodle and the purchaser.
AKASTiq® is a registered trademark of AKAS Tex.
Dri-QWick™ is a registered trademark of AKAS Tex.
ECO-PUL™ is a registered trademark of AKAS Tex.
ProCare® is a registered trademark of AKAS Tex.
ProCool® is a registered trademark of AKAS Tex.
ProECO® is a registered trademark of AKAS Tex.
ProSoft® is a registered trademark of AKAS Tex.
Stretch-FIT™ is a registered trademark of AKAS Tex.
TransWICK™ is a registered trademark of AKAS Tex.
SILVADUR™ is a registered trademark of DuPont de Nemours, Inc.
REPREVE® is a registered trademark of Unifi, Inc.
COOLMAX® is a registered trademark of The LYCRA Company.
Lycra is a registered trademark of The LYCRA Company.
Zorb® is a registered trademark of Wazoodle Fabrics.
Yes, it is possible, however please see the Licensing FAQ for all the requirements.
We source fibers and yarns within the United States mostly direct from local mills.
No PFAS, PFOA, lead, dioxins, heavy metals, BPA, phthalates, formaldehyde or nanoparticles.
We establish partnerships with vendors keeping an eye on the sustainability of their processes.
To inspire creation of reusable articles that help to reduce land-fills of disposable waste.
Made in US mills with safe workplace practices and fair wages following all labor regulations.
Closely controlled facilities and EPA-compliant processes that do not pollute the environment.
Are you overwhelmed with the choices available? Or not sure which product will work for your application?
Drop us a detailed message and we'll help identify the Right Fabric for YOU!