- Seconds FAQ
100% Free of PFOS, PFOA, lead, dioxins, heavy metals & BPA; Free from phthalates: contains no DEHP, DBP, BBP, DINP, DIDP and DnOP. Read Blog Article
Super soft and super absorbent, this heavyweight, double-sided microfiber terry is made of special filaments that are three times finer than silk.
Absorbs 8 times its weight in under 2 seconds and soaks up 20 times faster than other material (bamboo, cotton, hemp knits)
The unique construction of the fibers greatly increases moisture distribution & holding capacity
When cutting, use a sharp knife or scissors as the fabric can easily fray. If you prefer to pre-wash, serge all sides to prevent unraveling of threads
Number one choice worldwide for making towels, wipes, soaker pads, doublers, insert layers and many other incontinence products
CPSIA certified, meeting stringent standards by the U.S. Consumer Products Safety Commission on lead and phthalates and flammability.
All Zorb fabrics are super absorbent by virtue of their knitting construction; they are not made with SAP (super absorbent polymers), so their super absorbency lasts for the lifetime of the fabric.
All Zorb fabrics are designed with the ability to exponentially increase their absorbency; use multiple layers of Zorb to supercharge your products' absorbency.
Country of Origin: Made in USA
Manufacturer: AKAS Tex
Fabric Content: 100% polyester
📚 Read about Fiber Content for Fabrics - Labeling Made Easy
Fabric Weight: 310 GSM / 9.2 ounces per square yard
Fabric Width: 62" - 65" wide / 157 cm Wide - 165 cm Wide
Approx. Shrinkage (Length): 1% - 2%
Approx. Shrinkage (Width): Minimal
Approx. Stretch (Length): Minimal
Approx. Stretch (Width): 5%
Quantity Information: Quantity = number of continuous yards., Orders of more than 10 yards may ship in more than 1 piece. If you would like a continuous piece, please leave a comment & we will try to accommodate your request., Seconds quality material may not ship in completed lengths. They may be in several cut pieces not less than 18" or so.
Care Instructions: No prewash, Wash medium, Serge open sides before washing, Dry low, No Fabric softener, No Bleach, No Chlorine
❗ Read about the 7 Reasons Your Fabric Could Break Down - Fabric Care Made Easy
Important Note about Sharp Blades when cutting Microfiber Terry Fabrics
Microfiber terry Plus is a unidirectional knit. It has to be cut using a very sharp blade and one with no nicks or burrs. If not it can fray very easily and seemingly tear apart. That is somewhat like in knits when you pull at one stitch the entire line unravels. Typically it frays when cut from the leading edge. This is the edge where the blade can catch on to one stitch and it gets pulled apart in what looks like a tear. If this happens use a different blade or sharp scissors, and try cutting from the other sides. One edge is typically more fragile and prone to unraveling than the other three. When we cut the MFT Plus for orders we make sure to sharpen the cutter blade first. And if it still gets caught while cutting we use a new blade for cutting. This is also the reason why it is not recommended to pre-wash the fabric before sewing. Fibers from the leading edge can get caught in anything sharp and unravel the fabric completely.
Additional Care Instructions:
It is not recommended to pre-wash before sewing. If you prefer to pre-wash, serge (or sew/finish) all open edges to prevent unraveling of threads. However it is recommended to wash before using it.
Liquid detergent is preferred over powder because there is a chance that the powder will not dissolve completely and in that case the powder will be stored inside the microfiber. This risk is compounded if cold water is used. Remember, microfibers tend to hold everything, so use half the quantity of detergent you would normally use.
Never wash with fabric softeners. The microfiber will accumulate the softeners and over a period of time, will be saturated with it, reducing its efficiency.
Never wash the microfiber with other terry or other fabric which has lint. The microfiber will treat lint or any other fibers and dirt particles and store the particles inside the microfiber reducing its efficiency.
Do not wash with anything sharp or with anything that has hook tape. Sharp objects can snag the loops and cause them to run. Hook tape will attach to the loops and tear the fabric.
Never dry the microfiber in a dryer on high heat. It could actually melt the fibers with excessive heat and lock the traps. Dry on low heat and permanent press is the best setting.
Awesome stuff just want I needed for making reusable pads. Great Price awesome fabric. Always happy with Wazoodle!
*Wazoodle Fabrics makes no representations, collateral agreements, conditions or other warranties of any nature or kind, express or implied, with respect to such information or product and assumes no responsibility as to the accuracy or the suitability of the information or product for purchaser’s intended uses. The purchaser should conduct its own tests to determine the suitability of the material for their particular application.
No Returns Policy
All our orders are custom and cut to size. Due to the nature of our process, we are unable to accept any returns or exchanges.
- All natural fiber fabrics may have small holes, runs, etc. in the fabric. These are out of our control, however we take precaution & send you extra yardage in lieu of the defect.
- All bolts & rolls may have a +/- 10% variation. Discounted pricing reflects any discrepancies.
- Bolts & Rolls Seam & Damage Allowance - May contain seams where two ends of the fabric are sewn or taped together or marks which can be easily washed away. We always give extra yardage for seam & damage allowances.
- Hook & Loop are custom cut to your specifications. No returns accepted.
- Elastics are custom cut to your specifications. No returns accepted.
- Snaps & some elastics are packaged by weight so count is approximate. Pricing reflects possible minor quantity discrepancies.
This information is obtained by industry accepted test methods and represents typical data. Nothing contained herein is to be construed as permission or recommendation to infringe any patent. It is furnished for your general information only and does not represent a warranty or guarantee of Wazoodle Fabrics.
Wazoodle Fabrics makes no representations, collateral agreements, conditions or other warranties of any nature or kind, express or implied, with respect to such information or product and assumes no responsibility as to the accuracy or the suitability of the information or product for purchaser’s intended uses. The purchaser should conduct its own tests to determine the suitability of the material for their particular application.
The foregoing statements shall supersede the terms and conditions, whether express or implied, of any separate agreement of purchase and sale between Wazoodle and the purchaser.
Copyrights & Trademarks
AKASTiq® is a registered trademark of AKAS Tex.
Dri-QWick™ is a registered trademark of AKAS Tex.
ECO-PUL™ is a registered trademark of AKAS Tex.
ProCare® is a registered trademark of AKAS Tex.
ProCool® is a registered trademark of AKAS Tex.
ProECO® is a registered trademark of AKAS Tex.
ProSoft® is a registered trademark of AKAS Tex.
Stretch-FIT™ is a registered trademark of AKAS Tex.
TransWICK™ is a registered trademark of AKAS Tex.
SILVADUR™ is a registered trademark of DuPont de Nemours, Inc.
REPREVE® is a registered trademark of Unifi, Inc.
COOLMAX® is a registered trademark of The LYCRA Company.
Lycra is a registered trademark of The LYCRA Company.
Zorb® is a registered trademark of Wazoodle Fabrics.
Can I use your brand information on my products?
Yes, it is possible, however please see the Licensing FAQ for all the requirements.
We're here to help you Find the Right Fabric for Your Project
Why Wazoodle Fabrics?
1+ Million Yards of American-Made Fabrics In Stock
Huge Selection of High-Quality Eco-Friendly Fabrics
Our goal is to help you efficiently find fabrics that fulfill your unique wants and needs. Our Fabric Finder can save you some time while you shop if you have a specific type of fabric or end product in mind. However, If you would like to get a curated recommendation for your specific application, contact us and we'd love to help!